Showing 751 to 760 of 10000 search results

Avro 504 (E1864?), n.d.

Photographs, In Storage, P031906

Avro 504 (E1864?), port side view on the ground.

RFC/RAF next of kin and casualty cards, circa 1914-circa 1928

Archives, London, Hangar Two, DC78/3

62 6x8 inch drawers containing cards plus 11 boxes (boxes transferred to microfilm cabinet, 1999).

unknown

Aircraft & Exhibits, In Storage, 69/E/1332

Sectioned. Four cylinder vertical direct drive water cooled aero engine. Mounted on stand

unknown

Aircraft & Exhibits, In Storage, 69/A/429

Wicker work and bamboo cane aircraft seat with leather edging as fitted to WWI Farman aircraft. Slightly distorted on left hand side.

Aviation in England: Art souvenir photo album and programme

Library, In Storage, R009483

Official programme-souvenir of the Blackpool Aviation Week 1909

Library, In Storage, X004-1683

Most of the pages are loose.

Porcelain, RFC Field Service Cap

Aircraft & Exhibits, In Storage, 81/C/530

Miniature china heraldic RFC cap with multi coloured Fleur-de-lis design printed one side above LILLE with "LILLE captured by Germans Sept 1914" MODEL of R.F.C. Cap the other.

unknown

Aircraft & Exhibits, In Storage, X004-6193

Percussion hand grenade. Standard Infantry weapon. Cylindrical brass body (which contained the explosive) with segmented cast iron ring half way along (intended for fragmentation), turned wooden handle and long webbing 'streamers' attached to handle by cordage whipping, their purpose being to stabilise the grenade in flight (best ensured by a 'bowling' action), ensuring that it landed on its head, which was necessary to activate the impact fuse. Safety pin with cord fitted at base of brass body. Fuze missing-hole filled with small cork.

unknown

Aircraft & Exhibits, In Storage, X005-2779

Rectangular portrait format plastic label, corner fixing holes for screws, one damaged when label originally removed. Black lettering on cream background.

unknown

Aircraft & Exhibits, In Storage, 72/A/88

Rectangular varnished wooden board with edging and a bottom lip with three sprung steel clips screwed to the top. Manufacturers transfer applied in the centre and two screw fixing holes at top.